Side-by-side comparison · within brand

    Hikvision DS-2CD2746G2-IZS(C) vs Hikvision DS-2CD2146G2-ISU

    Spec-by-spec comparison of two dome camera models, with EN 62676-4 lens math and design recommendations.

    Specification side-by-side

    Hikvision DS-2CD2746G2-IZS(C)Hikvision DS-2CD2146G2-ISU
    ManufacturerHikvisionHikvision
    Form factorDome CameraDome Camera
    Resolution3.7MP (2560×1440)3.7MP (2560×1440)
    Focal length2.8-12mm2.8mm
    Horizontal FOV106°106°
    Effective range40 m30 m
    IR distance40 m30 m
    Low-light / ColorVuYesYes

    Verdict

    Both cameras offer comparable specs on paper. The choice typically comes down to vendor lock-in, NDAA compliance and existing VMS integrations rather than raw imaging numbers.

    Frequently asked questions

    Is Hikvision DS-2CD2746G2-IZS(C) better than Hikvision DS-2CD2146G2-ISU?

    Both cameras offer comparable specs on paper. The choice typically comes down to vendor lock-in, NDAA compliance and existing VMS integrations rather than raw imaging numbers. For installation-specific advice — mounting height, tilt, obstacle shadowing, BOM and PoE budget — drop both cameras into TodAidesign and the FOV cones, DORI rings (per EN 62676-4) and cable schedule render in real time on a satellite map or imported floor plan.

    What is the field of view of Hikvision DS-2CD2746G2-IZS(C) vs Hikvision DS-2CD2146G2-ISU?

    Hikvision DS-2CD2746G2-IZS(C) has a 106° horizontal FOV at 2.8-12mm. Hikvision DS-2CD2146G2-ISU has a 106° horizontal FOV at 2.8mm. Both cover the same angular scene; the FOV calculator on TodAidesign converts these into linear meters of coverage at any chosen target distance.

    Which camera has stronger IR illumination?

    Hikvision DS-2CD2746G2-IZS(C) reaches 40 m of IR illumination versus 30 m for Hikvision DS-2CD2146G2-ISU. The further-reaching IR camera is the better fit for unlit yards, parking perimeters and warehouses without permanent lighting.

    Can I plan a project mixing Hikvision and Hikvision cameras?

    Yes. TodAidesign is multi-vendor by design — drop Hikvision and Hikvision cameras on the same canvas, share the same EN 62676-4 lens math and DORI ring overlays, and consolidate them into one BOM with cable schedule and PoE budget. Vendor design tools (Axis Site Designer, Hikvision HiTools, Dahua Project Design Tool, i-PRO SDT) cannot do this because each speaks only its own catalog.

    Test both cameras in your project

    Drop Hikvision DS-2CD2746G2-IZS(C) and Hikvision DS-2CD2146G2-ISU on a real satellite map or imported floor plan. See live FOV cones, DORI rings, BOM and cable schedule in seconds.

    © 2026 TodAidesign. All rights reserved.